Melbourne electrical service
Switchboard Upgrades Melbourne
Still running an old fuse box, or fuses that keep blowing? ProWave Electrical upgrades switchboards (also called fuse boxes or electrical panels) across Melbourne from our base in Essendon, replacing old fuses with circuit breakers and safety switches.
- REC 38588 licensed
- Over 10 years of industry experience
- Based in Essendon
- 5.0 stars from 12 Google reviews
Request a quote
Tell Athan about your switchboard and he'll get back to you.
What's involved
Switchboard Upgrades, done properly
- Replacing old ceramic-fuse or rewireable fuse boards with modern circuit breakers
- Safety switches (RCDs) on every circuit when the board is replaced, as the wiring rules require
- Room on the new board for added circuits, such as an EV charger or a renovation
- An independent inspection before the power goes back on, which Energy Safe Victoria requires when a main switchboard is replaced
- A Certificate of Electrical Safety on completion
Common reasons to upgrade: fuses that keep blowing, no safety switches on the board, no room for new circuits, adding an EV charger, or renting the property out, since most Victorian rentals must have circuit breakers and safety switches. You get a clear quote before any work starts.
Recent work
New switchboards with circuit breakers and safety switches, and the kind of old fuse boards they replace.






Where we work
Switchboard Upgrades across Melbourne's inner north-west
Based in Essendon and servicing the surrounding suburbs and the wider Melbourne metro.
Related services
ProWave Electrical works for homes and businesses across Melbourne.
FAQ
Switchboard Upgrades: common questions
About switchboard upgrades in Melbourne
The cost of a switchboard upgrade depends mainly on what you have now, because replacing an old fuse board is a bigger job than adding to a newer circuit breaker board. Other factors are how many circuits need circuit breakers and safety switches, any faults that show up when the circuits are tested, the condition of the meter panel, whether the old board contains asbestos, and the independent inspection that main switchboard work needs in Victoria. Call or text 0402 255 889 to start a quote; a photo of your switchboard helps.
Energy Safe Victoria's warning signs include an old switchboard, especially one without a safety switch, old or broken switches and power points, flickering lights, and sparks from the switchboard, switches or power points. Other common reasons to upgrade are fuses that keep blowing, no room on the board for new circuits, adding an EV charger, or renting the property out, since Victorian rentals must have circuit breakers and safety switches.
If it has no safety switch, Energy Safe Victoria's advice is that your home should have one installed on the switchboard, so it's worth having the board checked. Fuses protect the wiring from overloads and short circuits, but they don't protect people from electric shock the way a safety switch does. Some older fuse and panel boards can't take modern circuit breaker components, so the whole board may need replacing, and a rented home has to meet the rental minimum standard. Call or text 0402 255 889 to start a quote; a photo of the board helps.
The power stays off from when the old board is disconnected until the new one has been tested and inspected. Replacing a main switchboard is prescribed work in Victoria, and Energy Safe Victoria requires the power to stay off after a residential-type main switchboard is replaced until an independent licensed electrical inspector has checked it, with the electrician arranging for the inspector to attend at an agreed time. How long that takes depends on the size of the board and anything found in testing. Ask what to expect when you get your quote, and plan around fridges and any medical equipment.
Enough to protect every circuit. Energy Safe Victoria says that when a switchboard is replaced, the wiring rules (AS/NZS 3000, clause 2.6.3.2.5) require safety switches (RCDs) on all final sub-circuits, which are the circuits running from the board to your lights, power points and appliances. In a rental, if an existing board is modified to meet the minimum standard instead, safety switch protection is needed on all power point and lighting circuits. Many new boards use RCBOs, which combine a circuit breaker and a safety switch for each circuit, and Energy Safe's 2020 review described them as the most common type of safety switch installed in Victorian homes.
It might, if the board is old. WorkSafe Victoria lists electrical switchboards and their backing boards among typical asbestos-containing materials, including pitch-based boards such as Zelemite, Ausbestos and Lebah. Asbestos was widely used in building products until the mid to late 1980s, and it can be in anything installed before the total ban at the end of 2003. Don't drill, cut or remove an old board yourself. WorkSafe's asbestos compliance code sets controls for electrical work on these boards, and an asbestos mounting panel that's removed must be replaced with a non-asbestos one, which can add time and cost to an upgrade.
First, check they're registered: look up their REC number on Energy Safe Victoria's public register. Then ask whether the quote covers safety switches on every circuit, the independent inspection that main switchboard work needs and the Certificate of Electrical Safety, what happens if testing finds faults in your existing wiring, whether your board might contain asbestos, how long the power will be off, and whether the new board will have room for future circuits such as an EV charger. ProWave Electrical's REC number is 38588.
No, not for a home you live in. Selling doesn't, on its own, require a switchboard upgrade in Victoria: Energy Safe Victoria's 2020 review looked at requiring upgrades when homes change hands and found the costs would be high, needing dramatic safety improvements to justify them. It's different if the home is or will be rented, because rentals must have circuit breakers and safety switches. Energy Safe also tells buyers of homes built before the 1980s to have the wiring checked before moving in, so an old board can come up in negotiations. Ask your conveyancer about disclosure.
Need a switchboard upgrade? Call Athan.
Or send the quote form above and he'll get back to you about the job.
