Melbourne electrical service
LED Lighting & Downlights Melbourne
LED downlights use far less power than halogens. ProWave Electrical replaces old halogen downlights with LED, installs new downlights and light fittings, and fits ceiling fans and outdoor sensor lights across Melbourne, from our base in Essendon.
- REC 38588 licensed
- Over 10 years of industry experience
- Based in Essendon
- 5.0 stars from 12 Google reviews
Request a quote
Tell Athan about the lights you need and he'll get back to you.
What's involved
LED Lighting & Downlights, done properly
- Replacing halogen downlights with LED
- New downlights, pendants and other light fittings
- Ceiling fans
- Outdoor security and sensor lights
- Repairing or replacing light fittings that have failed
Halogen downlights run hot, use more power and burn out sooner than LED. Some halogen-to-LED changes are a simple globe swap, while others need the old transformer or the whole fitting replaced. Planning the layout first avoids dark patches and glare.
Recent work





Where we work
LED Lighting & Downlights across Melbourne's inner north-west
Based in Essendon and servicing the surrounding suburbs and the wider Melbourne metro.
Related services
ProWave Electrical works for homes and businesses across Melbourne.
FAQ
LED Lighting & Downlights: common questions
About LED lighting and downlights in Melbourne
Yes. Sometimes it's as simple as fitting an LED globe, but many older 12-volt halogens run off transformers that don't suit LED globes, which can cause flicker or early failure, so a complete LED fitting is often the better result. LED fittings also run much cooler than halogens, which matters where there's ceiling insulation. Anything involving the wiring, the transformer or the fitting itself is electrical work, and Energy Safe Victoria says electrical work isn't a DIY job in Victoria, even for small jobs.
The cost depends mainly on how many downlights you're changing and whether a globe swap will do or the whole fitting needs replacing. Other factors are whether the old lights are 12-volt halogens with a transformer each or 240-volt fittings, ceiling access and insulation, and whether new fittings need a different hole size. Call or text 0402 255 889 to start a quote; a photo of one of your downlights, and how many you have, helps.
Mainly whether the fan can go where there's already a light point, or needs a new point and cable run to it. A fan also needs a solid fixing, so the ceiling may need timber bracing where it will hang. Other factors are ceiling height and roof space access, whether you want a wall control or a remote, whether the fan includes a light, and how many fans you're installing. Connecting a ceiling fan to the wiring is electrical work, so in Victoria it needs a licensed electrician. Call or text 0402 255 889 to start a quote; a photo of the room helps.
IC-rated downlights, usually marked IC-4, are designed to be covered by ceiling insulation, so you need them wherever insulation will sit over or against a fitting. Victorian Government guidance for its insulation program says only IC or IC-4 downlights, as defined in AS/NZS 60598.2.2:2016, may be covered by insulation, and other fittings must not be. Halogen downlights give off a lot of heat: during the 2009 and 2010 Home Insulation Program, 197 house fires started from poorly installed insulation, including insulation covering halogen downlights. Replacing or modifying a fitting is work for a licensed electrician.
You need downlights sold as dimmable, and a dimmer that suits their LED driver. Many LED drivers are designed for trailing-edge dimmers, and lighting makers publish lists of dimmers that work with their products. Old dimmers left over from halogen lighting often cause flicker, buzzing or lights that won't dim smoothly, so if you're upgrading to LED, plan the dimmers at the same time. Changing a dimmer means working on the wiring, so in Victoria it needs a licensed electrician.
There's no single number, because it depends on the room and the light you want. The main factors are the room's size and ceiling height, how bright each downlight is (its lumens), its beam angle, and what the room is used for: a kitchen bench or study needs more focused light than a bedroom. Pendants, lamps and other lighting also change the count. Planning the layout before installation avoids dark patches and glare, so share the room size and how you use it when you ask for a quote.
The biggest factor is whether there's an existing outdoor light point to replace or a new cable has to be run to the spot. Height and access also matter, such as eaves on a two-storey house, along with the wall type and whether you want a switch to leave the light on or off as well as the sensor. Outdoor fittings need to be weatherproof for where they're mounted, and connecting a mains-powered light is electrical work for a licensed electrician. Call or text 0402 255 889 to start a quote; a photo of the spot helps.
No. Residential lighting upgrades stopped being eligible for Victorian Energy Upgrades incentives on 1 February 2023, according to the Essential Services Commission, so the old free or discounted downlight offers no longer apply to homes. Discounts under the program are now for business lighting. If someone offers your household free downlights under the program, check energy.vic.gov.au before agreeing to anything.
Need new LED lights or downlights? Call Athan.
Or send the quote form above and he'll get back to you about the job.
