Melbourne electrical service

Electrical Fault Finding Melbourne

Safety switch keeps tripping, half the lights are out, or a power point has stopped working? ProWave Electrical finds and repairs electrical faults across Melbourne from our base in Essendon, tracking down the cause rather than just resetting the switch.

Request a quote

Tell Athan what the fault is doing and he'll get back to you.

When do you need it? (optional)

Your details go straight to Athan and are only used to reply to your enquiry.

What's involved

Electrical Fault Finding, done properly

  • Tracing circuits that keep tripping a circuit breaker or safety switch
  • Finding out why power points or lights have stopped working
  • Chasing down faults that come and go
  • Checking power points or fittings that smell of burning or feel hot
  • Switchboard and wiring fault diagnosis
  • A clear explanation of the cause and the fix

A safety switch that keeps tripping is telling you something is wrong, usually a faulty appliance, moisture or damaged wiring. Fault finding means isolating circuits and appliances until the cause shows up, then repairing it properly.

Recent work

New Clipsal switchboard wiring with safety switches, cover open
New Clipsal switchboard, cover open

Where we work

Electrical Fault Finding across Melbourne's inner north-west

Based in Essendon and servicing the surrounding suburbs and the wider Melbourne metro.

Related services

ProWave Electrical works for homes and businesses across Melbourne.

FAQ

Electrical Fault Finding: common questions

About electrical faults in Melbourne

A safety switch trips when it detects current leaking where it shouldn't, so repeated trips mean something needs finding, often a faulty appliance, moisture in an outdoor power point or light, or damaged wiring. A safe first check is to unplug everything on that circuit and reset the switch once. If it holds, plug things back in one at a time to find the culprit. If it trips with everything unplugged, or won't reset, Energy Safe Victoria's advice is to call a licensed electrician. Never tape or hold a safety switch on. ProWave Electrical does fault finding across Melbourne: call or text 0402 255 889.

Check your switchboard first: if a safety switch or circuit breaker has tripped, Energy Safe Victoria says to reset it, and if it won't reset, to call a licensed electrician. If nothing has tripped and you have dim or flickering lights, low voltage or only partial supply, Energy Safe says not to touch the switchboard or anything metal, to unplug appliances, and to call your electricity distributor immediately. In much of Melbourne's north and north-west that's Jemena, on 13 16 26, but your bill shows your distributor.

It depends on how many lights are doing it. If lights through the whole house are dim or flickering, Energy Safe Victoria's advice is not to touch the switchboard, to unplug appliances and to call your electricity distributor. If it's one light or one room, likely causes are a failing globe, an LED that doesn't suit its dimmer, or a loose connection in the fitting or switch. Flickering lights are on Energy Safe's list of signs your wiring may be faulty, so apart from changing a globe, have a licensed electrician check it.

A circuit breaker or fuse cuts the power when a circuit is overloaded or has a short circuit, so repeated trips usually mean too much is running on one circuit, a faulty appliance or a wiring fault. Try spreading heavy appliances, such as heaters and kettles, across different circuits. If it keeps happening, Energy Safe Victoria's advice is to contact a licensed electrician. On an old fuse board, frequent blowing is also a good reason to look at a switchboard upgrade.

A common reason is a tripped safety switch or circuit breaker, so check your switchboard first. Lights and power points are usually on separate circuits, which is why the power points can go off while the lights stay on. If nothing has tripped, the power outlet itself, or a loose connection behind it, may have failed. Energy Safe Victoria is clear that changing a power point isn't a DIY job, so if resetting doesn't fix it, or it trips again, have a licensed electrician find the cause.

Usually because water is getting into something outdoors, such as a power point, a garden or sensor light, a junction box or a damaged cable, and the moisture lets current leak to earth, so the safety switch cuts the power as it should. Don't keep resetting it while things are wet, and don't open outdoor fittings to look inside. Note which switch tripped and whether it holds once everything dries out, then have a licensed electrician find the leak. Outdoor fittings need to be weatherproof for where they're mounted.

Stop using it and keep everyone away from it. If there's smoke or flames, get out, stay out and call Triple Zero (000), as Fire Rescue Victoria advises. Don't open the power point or the switchboard to look. Energy Safe Victoria lists sparks from switchboards, switches or power points as a sign your wiring may be faulty, and a burning smell or a power point that feels hot can mean a loose or overheating connection. Don't use that power point or circuit again until a licensed electrician has checked it.

Treat it as serious and stop touching it. Energy Safe Victoria says that if you get tingles or shocks from an electrical appliance or water taps, you should call your electricity company immediately, and that a licensed electrician must check the property's wiring. In much of Melbourne's north and north-west the distributor is Jemena, on 13 16 26, but your bill shows yours. Keep others away from the tap or appliance, and don't use it again until the wiring has been checked.

Need an electrical fault found and fixed? Call Athan.

Or send the quote form above and he'll get back to you about the job.

Call nowTextQuote