Melbourne electrical service

EV Charger Installation Melbourne

ProWave Electrical installs home EV chargers (wall boxes) across Melbourne from our base in Essendon, including Moonee Ponds, Ascot Vale, Niddrie, Strathmore and Airport West. A wall charger runs on its own circuit with safety switch protection, so the first question is whether your switchboard has room.

Request a quote

Tell Athan about your EV charger job and he'll get back to you.

When do you need it? (optional)

Your details go straight to Athan and are only used to reply to your enquiry.

What's involved

EV Charger Installation, done properly

  • A dedicated circuit from your switchboard to the charger
  • Wall-mounted EV charger installation
  • A check that your switchboard and supply can carry the extra load
  • A switchboard upgrade where there isn't room
  • Safety switch protection for the charger circuit
  • A Certificate of Electrical Safety for the installation

The Victorian Government says charging from a standard power point adds about 14 to 21 km of range per hour, and a Level 2 wall charger about 42 to 65 km for most vehicles. Most Victorian homes are single-phase, and Level 2 charging on a single phase meets most people's daily needs.

Where we work

EV Charger Installation across Melbourne's inner north-west

Based in Essendon and servicing the surrounding suburbs and the wider Melbourne metro.

Related services

ProWave Electrical works for homes and businesses across Melbourne.

FAQ

EV Charger Installation: common questions

About EV charger installation in Melbourne

The cost of a home EV charger installation depends more on your home than on the charger you choose. The main factors are how far the switchboard is from where you park, the cable route through walls, ceilings or underground, whether your switchboard has room for a dedicated circuit and safety switch or needs an upgrade, and whether your home is single-phase or three-phase. The Victorian Government notes the total cost depends on your home's design, wiring access and other factors, which may include a switchboard upgrade. Call or text 0402 255 889 to start a quote; a photo of your switchboard and where you park helps.

A Level 2 charger is a dedicated wall charger, or wall box, on its own circuit. The Victorian Government says it supplies at least twice the power of Level 1 charging from a standard power point, adding about 42 to 65 km of range per hour for most vehicles, compared with about 14 to 21 km per hour from a power point. It needs dedicated circuitry, so installing one is electrical work for a licensed electrician, and depending on your home it may also need a switchboard upgrade.

Yes. The Victorian Government says charging from a standard power point adds about 14 to 21 km of range per hour, and with the average Victorian driving around 38 km a day, it will meet most people's daily travel needs. To avoid overloading existing circuits, the Electric Vehicle Council recommends a dedicated circuit for your car, and a 15 amp outlet with a matching 15 amp charger raises the charging rate by about 50% compared with a standard 10 amp setup. Avoid extension leads and adaptors, and have an electrician check the outlet you plan to use.

For most Melbourne homes, a single-phase charger, typically around 7 kW, is the practical choice. The Victorian Government says most Victorian houses are single-phase, that Level 2 charging on a single phase will meet most people's daily commute needs, and that most EVs on the Australian market can only take up to 11 kW of AC charging, so a bigger charger often won't charge them at a higher rate. A 22 kW charger also needs a three-phase supply, and upgrading to three-phase means higher installation costs and a supply alteration through your electricity distributor, such as Jemena.

Not always. A wall charger needs its own dedicated circuit with safety switch protection, so the questions are whether your switchboard has room for it and whether your home's supply can carry the extra load. An upgrade usually comes up when the board is full, is an old fuse board without safety switches, or can't take more load. Replacing a main switchboard is prescribed work in Victoria, so it must be inspected by an independent licensed electrical inspector before the power goes back on.

Yes. Installing an EV charger is electrical installation work, and Energy Safe Victoria says a licensed electrician must issue a Certificate of Electrical Safety whenever they complete electrical installation work. For minor work, which Energy Safe lists as including circuit breakers, safety switches, power points and equipment that isn't plugged in, you should get your copy within 30 days. If the job also includes major work such as a new main switchboard, that part must be inspected by an independent licensed electrical inspector before it's turned on, and your copy is due within 4 days of the certificate being completed.

Need a home EV charger installed? Call Athan.

Or send the quote form above and he'll get back to you about the job.

Call nowTextQuote