Melbourne electrical service
Smoke Alarm Installation Melbourne
Working smoke alarms save lives, and Victorian rules say which homes need hardwired, interconnected alarms. ProWave Electrical installs and replaces smoke alarms across Melbourne from our base in Essendon.
- REC 38588 licensed
- Over 10 years of industry experience
- Based in Essendon
- 5.0 stars from 12 Google reviews
Request a quote
Tell Athan about your smoke alarms and he'll get back to you.
What's involved
Smoke Alarm Installation, done properly
- Smoke alarm installation and replacement for homes and rentals
- Victorian rules: hardwired 240-volt alarms with a backup battery in homes built or largely renovated after 1 August 1997
- Victorian rules: interconnected alarms, so they all sound together, in homes built or largely renovated after 1 May 2014
- At least one alarm on every level, and alarms between the bedrooms and the rest of the house
- Every alarm must meet Australian Standard AS 3786 and has a 10-year expiry date
A hardwired smoke alarm must be installed by a qualified electrician, though anyone can change a smoke alarm battery. Every Victorian rental also needs a smoke alarm safety check each year.
Recent work

Where we work
Smoke Alarm Installation across Melbourne's inner north-west
Based in Essendon and servicing the surrounding suburbs and the wider Melbourne metro.
Related services
ProWave Electrical works for homes and businesses across Melbourne.
FAQ
Smoke Alarm Installation: common questions
About smoke alarms in Melbourne
A chirp or a single occasional beep usually means the backup battery is almost flat. If the alarm has a replaceable battery, replace it straight away, which anyone can do. Some hardwired alarms have a sealed 10-year battery that can't be changed, so the whole alarm needs replacing. If a hardwired alarm keeps chirping after a new battery, it may be faulty or past its expiry date: every smoke alarm has a 10-year expiry. A hardwired alarm that needs replacing must be installed by a qualified electrician. Don't take the battery out or disconnect the alarm to stop the noise.
Yes, if your home was built, largely renovated or extended after 1 August 1997: those homes need smoke alarms connected to 240-volt mains power with a backup battery. Homes built before then can use battery-powered alarms, and all alarms must meet Australian Standard AS 3786. In a home that needs mains-powered alarms, swapping them for battery-only units wouldn't meet the rule. Consumer Affairs Victoria says a hardwired smoke alarm must be installed by a qualified electrician, although anyone can change a smoke alarm battery.
Yes, in homes built or largely renovated after 1 May 2014 that need more than one smoke alarm: all the alarms must be interconnected, so if one goes off they all do. For other homes, Victoria's Building and Plumbing Commission says alarms should be interconnected too, either hardwired or as wireless interconnected alarms powered by a ten-year lithium battery. In a home built after 1 August 1997, though, the alarms must still be connected to 240-volt mains power with a backup battery, so any replacement has to meet that rule as well.
Every 10 years. All smoke alarm units have a 10-year expiry date, whether they're hardwired or battery only, so check the date marked on each alarm. Fire Rescue Victoria says it's best to replace them with hardwired, interconnected alarms, and Victoria's fire services recommend new alarms with a 10-year battery, so there's no yearly battery change. In between, test them monthly and clean them at least once a year. Replacing a hardwired alarm is a job for a qualified electrician.
Usually something nearby is setting it off, or the alarm is old or faulty. Fire Rescue Victoria's list of common false alarm causes includes cooking smoke and burnt toast, steam from showers and cooking, aerosols such as deodorant and insect spray, and dust or fumes from building work, and the Victorian Government recommends dusting alarms once a year so dust doesn't set them off. An alarm too close to a kitchen or bathroom can be a problem, and any alarm past its 10-year expiry date should be replaced. Don't disconnect it: moving or replacing a hardwired alarm is a job for a qualified electrician.
By law, a Victorian home needs at least one smoke alarm on each level, and alarms between each sleeping area and the rest of the house, usually in the hallway outside the bedrooms. That's the minimum. Fire Rescue Victoria recommends alarms in every bedroom and living area as well, because an alarm outside a bedroom may not sound when a fire starts inside with the door closed. The right number for your home depends on its layout, how many levels it has and where people sleep.
The cost of installing smoke alarms depends on how many your home needs and what's already there. The main factors are the number of alarms your layout requires, whether they must be hardwired (homes built after 1 August 1997) or interconnected (built or largely renovated after 1 May 2014), whether existing wiring can be reused or new cable has to be run through the ceiling, how easy the roof space is to get into, and the type of alarm chosen. Call or text 0402 255 889 to start a quote; a photo of your current alarms helps.
Rental providers must make sure smoke alarms are correctly installed, working and fitted with batteries, and since 25 November 2025 an annual smoke alarm safety check is mandatory for every rental property. Consumer Affairs Victoria also says renters must be given written information on how the alarms work and how to test them. A faulty alarm must be repaired or replaced immediately, and if the rental provider can't be reached, the renter can authorise a repair of up to $2,500. Homes built after 1 August 1997 need hardwired alarms, installed by a qualified electrician.
Need smoke alarms installed? Call Athan.
Or send the quote form above and he'll get back to you about the job.
